share article

Share on facebook
Share on twitter
Share on linkedin

Triple Output Linear PSU Provides Up To 8A

News

Aim-TTi has extended its PL series of linear regulated laboratory power supplies to include a triple-output model, the PL303QMT. Unlike most triple-output PSUs, all three outputs are full performance with CV/CI modes, simultaneous voltage/current metering and switchable remote sense; total power is 228W.

 The PL303QMT has two identical 30V/3A outputs with quad-mode switching which provides independent, tracking and true parallel modes, the

 latter providing 30V/6A from a single output. The third output offers 0-6V at 0-8A, an unusually high current for a linear regulated unit. The resolution for this output is increased from 10mV to 1mV and current resolution of 1mA is maintained up to 8A with a selectable low-current range with 0.1mA resolution. The unit is compact being 3/4 rack width (320mm) by 3U high (130mm).

A rack mount kit is available which can accommodate the PL303QMT alone or in combination with any single output PL or PLH model.

www.aimtti.com  

Share this article

Share on facebook
Share on twitter
Share on linkedin

Member Login