share article

Share on facebook
Share on twitter
Share on linkedin

New memory and firmware capabilities for Yokogawa DLM2000 mixed signal oscilloscope

News

Yokogawa’s DLM2000 mixed-signal oscilloscope has been enhanced with longer memory capabilities and a number of firmware improvements.

In the new version, the length of the acquisition memory has been increased up to 62.5 Mpoints in the standard unit and up to 250 Mpoints with the extended memory option.  This means that, with the maximum memory installed (/M3 option), in single-shot mode, a 10 kHz signal lasting for more than one hour can be captured. The same memory can capture a 200 ms signal at a sample rate of 1.25 GS/s sample rate.

The built-in flash memory capacity has also been increased from 0.1 Gbyte to 0.33 Gbyte, while a new extended memory option with a capacity of 7.2 Gbyte has been introduced.

Also included are a number of enhancements to the history memory function: a unique Yokogawa capability with which the instrument can capture and replay many individual acquisitions that can be displayed one at a time or as an accumulation. Using search and measurement functions, this allows abnormal signals to be quickly isolated, analysed and precisely categorised without the need to carefully configure triggers to capture rare events.

In the enhanced DLM2000, the maximum number of history waveforms is increased from 20,000 to 50,000 and the default setting is changed to “all” so that all stored waveforms are displayed by a single click of the “history” key. Also enhanced is the zone search function, which now includes an intuitive search function covering the whole of the history waveform and is 20 times faster than the original version.

Together with a maximum continuous acquisition rate of 20,000 waveforms per second, which increases to approximately 450,000 in N Single mode, the history memory in the DLM2000 enables abnormal signals to be captured without needing to know what makes them different 

Yokogawa is also offering many of its firmware packages as separate items which customers can purchase and install themselves rather than as factory-fitted options. A free trial period of one month is available for all these options.

Firmware packages include dedicated software for power-supply analysis as well as analysis of popular serial buses including automotive CAN/LIN and FlexRay trigger and analysis.

There are two or four channel models, with up to 500 MHz bandwidth and 2.5 GS/s sampling speed as well as the longest memory and fastest update rate (up to 450,000 waveforms per second) in this class of instrument.  The DLM2000 Series offers a flexible combination of analogue and digital inputs, plus a large-screen display in a compact ergonomically styled body. 

Combined with the advanced search and cursor/parameter measurement capabilities, two independent zoom windows enable users to see the waveform detail of two parts of the acquisition which can be separated by a long time period. It is thus possible to quickly find, measure and analyse the details of the cause and effect of an abnormality which could be on the same or different input channels. They also make it possible to view and compare the details and timings of different serial buses which are running at different speeds.

The DLM2000 is based on an easy-to-use portrait design with the large display located above the controls, enabling it to be nearer the eyes of the user and keeping the footprint on the bench to a minimum. The intuitive controls are laid out so that a user can see at a glance what channels and features are switched on and quickly make the measurements that are needed.

Users can automatically or manually split the display to separate individual channel waveforms while maintaining their full resolution and dynamic range, making it easy to see the details of all signals regardless of the number of channels in use.

The DLM2000 allows the user to choose to capture a mix of analogue and more digital signals. With a push of a button, channel 4 converts into eight digital inputs and the DLM2000 becomes a mixed signal oscilloscope. This makes it possible to view three analogue and eight digital signals simultaneously and view more control and logic signals. Digital channels can also be used to analyse I2C, SPI and UART serial buses while keeping the analogue channels available for other signals.

The hardware optimised architecture and dedicated ScopeCORE IC in the DLM2000 enable measurements and signal processing to be carried out in real time. This means that turning on more channels does not affect the waveform acquisition rate and measurements are always performed at high speed.

Other key features include powerful triggering capabilities, real-time filtering, automatic parameter measurement and statistical analysis, parameter trend and histogram displays, and FFT frequency domain analysis.

For further information about the DLM2000 visit www.tmi.yokogawa.com

About Yokogawa Test & Measurement

Yokogawa has been developing measurement solutions for nearly 100 years, consistently finding new ways to give R&D teams the tools they need to gain the best insights from their measurement strategies. The company has pioneered accurate power measurement throughout its history, and is the market leader in digital power analysers.

Yokogawa instruments are renowned for maintaining high levels of precision and for continuing to deliver value for far longer than the typical shelf-life of such equipment. Yokogawa believes that precise and effective measurement lies at the heart of successful innovation – and has focused its own R&D on providing the tools that researchers and engineers need to address challenges great and small.

Yokogawa takes pride in its reputation for quality, both in the products it delivers – often adding new features in response to specific client requests – and the level of service and advice provided to clients, helping to devise measurement strategies for even the most challenging environments.

The guaranteed accuracy and precision of Yokogawa’s instruments results from the fact that Yokogawa has its own European standards laboratory at its European headquarters in The Netherlands. This facility is the only industrial (i.e. non-government or national) organisation in Europe to offer traceable power calibration, to national and international standards, at frequencies up to 100 kHz: a requirement for higher harmonic measurements specified in quality standards such as ISO9000.Meet the precision makers at tmi.yokogawa.com.

About Yokogawa Electric Corporation

Yokogawa’s global network of 88 companies spans 55 countries. Founded in 1915, the US$4 billion company conducts cutting-edge research and innovation. Yokogawa is engaged in the industrial automation and control, test and measurement and other business segments. For more information about Yokogawa, please visit the company’s website www.yokogawa.com.

For further information please contact:

Terry Marrinan

European Test & Measurement Centre 

Yokogawa Europe BV

Euroweg 2

3825 HD Amersfoort

The Netherlands

Tel: +31 (0) 88 464 1811

Fax: +31 (0) 88 464 1111

Email: terry.marrinan@nl.yokogawa.com

www.tmi.yokogawa.com

Peter Bush

Peter Bush Communications Ltd

Stansted House

Shire Hill

Saffron Walden

Essex

CB11 3AQ

Tel : +44 (0) 1799 520022

Fax : +44 (0) 1799 528330

Email : peter@peterbush.co.uk

 

Share this article

Share on facebook
Share on twitter
Share on linkedin

Related Posts

View Latest Magazine

Subscribe today

Member Login