LPRS, Europe’s leading manufacturer of short-range wireless devices, now offers Internet of Things (IoT) system builders with a system-on-chip fully integrated wireless controller suitable for remote, battery powered sensor systems, which can offer current consumption as low as 32µA
The low cost, high security easyRadio Integrated Controller (eRIC) offers designers seven power saving modes of operation to ensure maximum battery life of remote sensors. The LPRS eRIC transceiver power saving modes provide control of the duty cycle of the receiver so that the ‘ON’ time can be set to 12.5%, 6.25%, 3.1% , 1.56%, 0.78%, 0.39% & 0.2% with corresponding levels of power saving from its “always on” current of 16mA. The transmitter may then be independently set to the same duty cycle as the receiver or longer as required for transfer of data. Up to 250Byte data-packets are supported throughout all operating modes and up to 500Kbs over air data rates are available.
The LPRS eRIC (easyRadio Integrated Controller) module is now available with operating frequencies for World Markets and provides secure over-air transmission with the availability of an AES 128 bit data encryption option. Many other advanced features are available as standard including; received signal strength indicator (RSSI), carrier detect and group ID.
The advanced design of this transceiver uses system-on-chip (SOC) technology removing the need for an external processor. The on-board processor memory is partitioned giving half to the easyRadio configurable settings and communication software and leaving the rest available for design engineers to add their own application code. Code can be written using industry standard tools and a quick to learn API (application programming interface). This partitioned memory design will often eliminate the need for any additional microcontroller, saving cost, space and power.
eRIC is an exceptional value RF transceiver intended for embedded high-volume applications in the “Smart” or “IoT” arena including; building and lighting control, security, home monitoring and medical products, vehicle and contents monitoring, renewable energy control and remote sensor systems. eRIC has been designed to simplify end product manufacture and is packaged for SMD assembly and measures just 20x15x5mm
eRIC continues to use the popular and simple to use easyRadio programming protocols, operates in the ISM frequency bands (Europe 433 and 868MHz, USA 915MHz), meets ETSI and FCC requirements, has pin interface compatibility with existing easyRadio Advance (eRA) products, has a simple to use and customer configurable and programmable I/O interface and has a built-in temperature sensor.
Barry Gillibrand, Managing Director of LPRS, comments, “Many industrial monitoring systems and possible IoT applications will employ sensors in remote and difficult to access locations. Ensuring maximum operating life of battery powered devices is a key criterion for design engineers and eRIC provides a flexible solution with maximum convenience. Our many years of experience of supplying easyRadio wireless modules has provided us with real-world experience of our customer’s requirements and eRIC provides a complete solution for high-volume wireless control and communication markets. Continuing to use our very successful easyRadio interface ensures our existing customers a smooth transition and gives new customers the ability to configure operating frequency, bandwidth, output power, and data-rate enabling a developer to avoid local interference from nearby devices
In addition to designing and manufacturing the highly successful eRIC and easyRadio Advanced (eRA) wireless modules in the UK, the full LPRS product range now includes; Raspberry Pi and Arduino Shield wireless platforms, antennas, wireless key fobs, a wide range of sensor products and the IQRF range of wireless mesh networking components for telemetry, industrial control and building automation.